Avery-dennison 9400 Series Programmer Manual Manuel d'utilisateur télécharger pdf (Page 61)

This value is measured in tenths of

millimeters (TOMMS) and must be less

than the maximum length of the supply.

Values: 0-2032

COLUMN One to four digits to define the column

location of the field on the supply. This is

the distance from the guide edge zero

point at the

left

edge of the supply and the

left edge of the field.

The zero point is 1.5 mm or 0.060 inches

from the left edge of the supply.

The unit of measurement is tenths of

millimeters. The range must be less than

the maximum width of the supply.

Values:

9425 0-508 (0 to 2 inches)

9445 0-1016 (0 to 4 inches)

9465 0-1016 (0 to 4 inches)

9474 0-1016 (0 to 4 inches)

The following format data stream uses the graphic data

defined earlier in this chapter. The graphic is inserted 20 mm

from the bottom and 20 mm from the left edge of the supply.

{

F11,550,507;LETTER-A

G1,200,200

T0,I,0,400,100,1,1,0,0,B

}

Using Graphics

5. Using Graphics

5-9

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 105 106

Pas de commentaire

Avery-dennison 9400 Series Programmer Manual Manuel d'utilisateur Page 61