Avery-dennison 9400 Series Programmer Manual Manuel d'utilisateur télécharger pdf (Page 49)

For example, batch 1 below prints a date in text field T01.

Since batch 1 and batch 2 are printed on the same day, batch

2 can leave out field T01. Since T01 was defined in the

preceding batch, it will automatically print in batch 2.

Batch 1: Batch 2:

{ B12,1,0,1,1,0,C; { B12,1,0,1,1,0,C;

T01;12/31/90 T02;Stock #52014

T02;Stock #43768 T03;Sprinkler

T03;100’ Hose }

}

NOTE: If two fields overlap, do NOT use this feature. If fields

overlap, you must send the format before each batch.

Batch Separators

This command selects the use of batch separators. A batch

separator is a tag with a wide black line across the top or a

double length tag and is last tag in a batch. Your

Operator’s

Handbook

shows the type of batch separator used by your

printer.

NOTE: When printing online, add 1 to your batch quantity.

The batch separator does not add a tag to the total

number of tags in a batch. (In offline operation a

batch separator increases the batch count by one

tag.)

The command structure is shown below, followed by an

example.

NOTE: If using this batch separator packet, make sure the

batch header "MODE" value is set to C.

Message Structures

4. Message Structures

4-33

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 105 106

Pas de commentaire

Avery-dennison 9400 Series Programmer Manual Manuel d'utilisateur Page 49