Avery-dennison 9400 Series Programmer Manual Manuel d'utilisateur télécharger pdf (Page 38)

COLUMN One to four digits to define the column

location of the field on the supply. This is

the distance from the guide edge zero

point at the

left

edge of the supply and the

left edge of the field.

The zero point is 1.5 mm or 0.060 inches

from the left edge of the supply.

The unit of measurement is tenths of

millimeters. The range must be less than

the maximum width of the supply.

Values:

9425 0-508 (0 to 2 inches)

9445 0-1016 (0 to 4 inches)

9465 0-1016 (0 to 4 inches)

9474 0-1016 (0 to 4 inches)

DIRECTION One digit to define the direction of the line.

Values: 0 = Vertical

1 = Horizontal

STOP One to four digits to define the stop

position (Row or Column, dependent on

the DIRECTION setting) for the line.

Values: 1-2032

9400 Series Programmer’s Manual

4-22

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 105 106

Pas de commentaire

Avery-dennison 9400 Series Programmer Manual Manuel d'utilisateur Page 38