Avery Dennison Power Stacker Instructions d'exploitation télécharger pdf (Page 14)

4. Unlock the tag weight handle by turning the knob counterclockwise.

backw

ard

Handle

2-4 Operating Instructions

5. Push th

e handle all the way backward for tags 1.6 inch or shorter;

forward for tags 1.6 inch or higher.

6. Tighten the knob.

7. Place the tag weight against the tag stop.

8. Print a test batch of 50 tags or 25 RFID tags. Refer to your printer’s

Operator’s Handbook for instructions.

9. Move the tag weight out of the way.

10. Adjust the guide rails to match the width of your tags by moving the

guides against the tags.

Note: Use two hands to move the guide rails and hold the rails on the ends

by the bar.

Knob

forw

ard

Tag Stop

Tag Weight

Slide

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Avery Dennison Power Stacker Instructions d'exploitation Page 14