Avery-dennison SNAP Webserver Manual Manuel d'utilisateur télécharger pdf (Page 5)

SNAP Printer Web ServerUsers Manual Version 1_2.doc Page 5 of 15

Obtaining a DHCP Address

The printer comes from the factory in DHCP mode. Simply connect your network

cable to the Ethernet connector on the Network Interface Card installed in the

printer and then turn the printer on.

Because the DHCP process may take some time, wait at least 1 minute after the

printer finishes its initialization (Ready light is on steady) before continuing.

There are two Ethernet connectors on the back of the

printer. One is on the motherboard, and one is on the

Network Interface Card installed in the printer. Do not use

the connector on the motherboard.

You must have a Network Interface Card option installed in

the printer. Contact Avery Dennison Customer Service to

purchase this option.

Network Interface Card

Motherboard. Do not use.

1 2 3 4 5 6 7 8 9 10 ... 14 15

Pas de commentaire

Avery-dennison SNAP Webserver Manual Manuel d'utilisateur Page 5