Avery-dennison Monarch 932 Stacker Manuel d'utilisateur télécharger pdf (Page 10)

5. Move the tag stop up and down by using your thumb to pull out slightly

on the release tab and lift up until it stops.

Note: Adjust the tag stop to the length of the tags.

6. Make sure the transport lock handle is in the locked position.

7. Make sure supply is loaded and the printer is turned on.

8. Press Feed or Cut on the printer or keyboard several times.

The supply should feed through the knife and tags should be cut and

placed in the stacker tray.

9. Use the cut tags as a guide and adjust the guide rails back into the

grooves so that they are barely touching the sides of the tag.

1-6 Getting Started

Tag Stop

Transport Lock

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Pas de commentaire

Avery-dennison Monarch 932 Stacker Manuel d'utilisateur Page 10