Avery-dennison A64 CS Stacker Manuel d'utilisateur télécharger pdf (Page 7)

Cleaning

1. Turn off the stacker.

2. Remove any tags.

3. Pull the black release block to open the knife assembly.

4. Use compressed air or a small brush to clean the sensors.

5. For better access to the sensors, loosen the transport thumbscrews and remove the transport assembly.

6. Install the transport assembly.

7. Close the knife assembly.

8. Clean the feed roller.

Transport Thumbscrews

Release Block

Knife Swing Assembly

Feed Roller

1 2 3 4 5 6 7 8

Pas de commentaire

Avery-dennison A64 CS Stacker Manuel d'utilisateur Page 7