Avery-dennison 7411 Print Server Manuel d'utilisateur télécharger pdf (Page 21)

7. Use the Printer Manager in the Admintool utility under Open Windows as

follows:

Select Edit

Select Add

Select Add Access to Remote Printer

At the PrinterName prompt, type any name for the print queue

At the Printer Server prompt, type:

name\!servicename

(for example, MonarchPrinter\!BINARY_P1), where:

name matches the print server name as entered in the host’s table.

servicename is the print service name. For binary graphics files use

the service BINARY_P1; for text files use the service TEXT_P1.

8. Set the Print Server OS to BSD (this is the default setting).

9. Select Add.

10. To print, use the standard lp command; for example:

lp –dMonarchPrinter filename

Notes:

♦ We recommend using the /etc/hosts file for the printer name rather than

NIS or other name services.

♦ Due to a bug in the Sun lpd implementation on Solaris 2.4 and earlier

releases, may cause problems printing very long print jobs. The

workaround is to configure the print server as an HP JetDirect card using

the HP JetAdmin for UNIX software.

♦ Solaris print queues can also be configured from the UNIX shell using the

lpadmin command.

Management Methods 3-5

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Pas de commentaire

Avery-dennison 7411 Print Server Manuel d'utilisateur Page 21