Avery-dennison 6054 Network Control Module Manuel d'utilisateur télécharger pdf (Page 3)

4. Loosen the two screws on the 6054 Network Control

Module and slide the 6054 Network Control Module

onto the Docking Module’s connector plate. Tighten

the screws.

5. Using a Philips screwdriver, attach the end cap to the

end of the 6055 Docking Module.

6. Carefully turn over the Network Control Module.

You can connect up to four Docking Modules with each

Network Control Module. Repeat steps 3 – 6 for each

additional Docking Module. Make sure you attach the

end cap to the final Docking Module.

End

Cap

1 2 3 4 5 6 7 8

Pas de commentaire

Avery-dennison 6054 Network Control Module Manuel d'utilisateur Page 3