Avery-dennison Monarch 9906 Internal Liner Take-Up Manuel d'utilisateur télécharger pdf

OPERATING INSTRUCTIONS

These instructions are for the Monarch® 9906 printer using the internal liner take-up option.

Internal Liner Take-Up

Internal liner take-up collects the liner on a take-up reel located inside the printer’s cover. This

feature must be used with peel mode. Refer to the 9906 Operator’s Handbook for additional

printer information.

1. Open the cover.

2. Unlock the printhead and lift the printhead

assembly until it locks into place.

3. Ope

n the printer’s exit cover.

4. Remove the labels from the first 18 inches of the

liner.

5. Remove the liner take-up bail.

6. Feed the liner over the peel bar and under the

peel roller.

Monarch is a registered trademark of Avery Dennison Corporation

Peel Bar

7. Wra

p the liner around the liner take-up core in a

counter-clockwise direction.

Peel Roller

Liner Take-up Core

Liner Take-up Bail

Liner

1 2 3

OPERATING INSTRUCTIONS These instructions are for the Monarch® 9906 printer using the internal liner take-up option. Internal Liner Take-Up Internal

Page 2

2 Internal Liner Take-up Operating Instructions 8. Hold the liner while placing one end of the take-up bail in one of the grooves in the take-up

Removing a Full Liner Take-Up Roll Remove the liner take-up when the printer alerts you of a full roll. The liner take-up reel holds approximately ha

Pas de commentaire

Avery-dennison Monarch 9906 Internal Liner Take-Up Manuel d'utilisateur